Kamien Interactive Listening Guides

created by Larry Worster using ChartCreator.
The Kamien Interactive Listening Guides may be edited using ChartCreator. See Website for details.
Click below to download the Kamien Listening Guide you wish to use, then read the installation instructions for Mac and Windows below.

Click here to read the FAQ sheet about the Interactive Listening Guides.

Minimum System Requirements:

Windows

Macintosh

Pentium processor or compatible. 120 Mhz
Windows 98 or higher.
VGA with 8-bit color (256 colors) or greater.
12 MB available RAM / 8 MB free disk space
Windows compatible sound card
CD-ROM drive, 4x minimum recommended
Headphones or speakers
Note: ChartPlayer works on Windows NT but responds slowly.

PowerPC 601 processor, 120 MHz
24MB RAM
12 MB available RAM / 10MB free disk space
System 9.1 or OSX.2
SVGA 8bit color monitor 640x480 resolution
External speakers or Headphones

ChartPlayer Downloads for Kamien Listening Charts

Kamien 8th edition, 4-CD set
Kamien 8th edition, 8-CD set
Kamien, 4th edition, 4-CD set
Kamien , 5e Brief , 4-CD set

Macintosh System 9 or OS X, versions 10.0.x and 10.1.x

Note: If you have System 9, you must upgrade to System 9.1 or later or you will hear no sound output from ChartPlayer.

Note: If you have OS X, versions 10.0.x up to 10.1.x, you will need to restart your computer in System 9 to use ChartPlayer. To do this please follow these directions:

      1. If you have these versions of OS X, System 9 is already installed on your computer .
      2. To restart in System 9, open the System Preferences program on the Apple menu.
      3. Click on Startup Disk.
      4. Choose System 9 when it appears.
      5. Click Restart.
      6. To return to OS X when you are finished using ChartPlayer, choose the Startup Disk Control Panel under Control Panels on the Apple menu.
      7. Choose OS 10.
      8. Click Restart.

To Install the Program in System 9

    1. Turn off CD auto-play
      • If you do not do this, do not expect the software to respond properly. Figuratively speaking, your computer and ChartPlayer will fight for control of the CD. The results are unpredictable.
      • On the Apple Menu choose Control Panels/QuickTime™ Settings.
      • Uncheck the Enable CD Audio AutoPlay checkboxes.
      • Close the control panel by clicking in the close box.
    2. Download the application for System 9.
    3. Double-click the installer icon.
    4. Follow the instructions that follow.

To Install the Program in Mac OS X, versions 10.2.8 and later

      1. Turn off iTunes auto-play
        • If you do not do this, do not expect the software to respond properly. Figuratively speaking, your computer and ChartPlayer will fight for control of the CD. The results are unpredictable.
        • On the Apple Menu choose System Preferences.
        • Click on CDs & DVD's.
        • Set When You Insert a Music CD to "Ignore."
        • Close the System Preferences.
      2. Download the application for OS X
      3. Double-click the installer icon.
      4. The installer will create a virtual disk on your desktop called "Kamien 5th Edition."
      5. Double-click the virtual disk and drag the folder inside into your Applications folder.
      6. If you desire, open the ChartPlayer folder and drag the Kamien ChartPlayer icon to the dock to create an icon for the program on the dock.

To Install the Program in Windows:

      1. Windows 98: Turn off CD Auto-insert Notification.
        • If you do not do this, do not expect the software to respond properly. Figuratively speaking, your computer and ChartPlayer will fight for control of the CD. The results are unpredictable.
        • Choose Control Panels from the Start Menu/Settings option.
        • Choose System. Choose CD-ROM. Choose your CD-ROM.
        • Choose Settings. Deselect "Auto-insert notification."
        • Close all windows.
        • Restart your computer.
      2. Windows XP: To turn off auto play
        • Select My Computer from the Start Menu
        • Highlight the CD-ROM Icon
        • Right click and go into Properties
        • Choose Auto Play
        • Drop down box - Select Music CD
        • Mark Box - Action to Perform
        • Highlight - Take no action
        • Click OK
      3. Windows 2000: Cannot turn off auto-play!!
        • If an audio program (such as MediaPlayer or MusicMatchbox) or CD duplication program (such as Roxio) opens automatically, manually close it before using ChartPlayer.
        • You will need to do this each time you use ChartPlayer
      4. Download the application.
      5. Choose either Open to install the program without downloading the installer or Save to download and save the installer.
      6. If you chose Open, follow the installer instructions.
      7. If you chose Save, double-click the installer. Follow the installer instructions.
        • To find this file, you must know where your browser stores its downloaded files. Watch the file as it downloads to see the filename. You can use the Find Files function in Windows to locate it if you know the filename.

    Happy Listening

 

Copyright ©2000 The McGraw-Hill Companies. All rights reserved. Any use is subject to the Terms of Use and Privacy Policy.
McGraw-Hill Higher Education is one of the many fine businesses of The McGraw-Hill Companies.

If you have a question or a problem about a specific book or product, please fill out our Product Feedback Form.
For further information about this site contact music@mcgraw-hill.com or let us know what you think by filling out our Site Survey.